IGNITER BREAKOUT BOARD & QUICKPLUG HARNESS (PARALLEL)
Breakout Boards are a convenient, re-usable solution for wiring multiple igniters to a single cue in parallel.
If you are using Talon Clip-On Igniters, you can plug up to two igniters into the breakout board.
If you are using VISCO Shroud Igniters, you can plug up to five igniters into the breakout board, or use multiple breakout boards together for a maximum of 10 igniters per cue.
Includes:
- 1 x Breakout Board
- 1 x Quickplug Harness
An Introduction to IGNITE Firing System
IGNITE is a reusable wireless fireworks firing system designed to fire fireworks from your phone or tablet. Using the IGNITE App, you can control up to six IGNITE i18 modules for a total of 108 cues.
Connect the IGNITE Igniters to the fireworks fuse, plug them into the module, and use the app to manually press buttons or automate your show with one press of a button to optional music.
Download & Install the App
Download the free app and install it on your iOS or Android mobile device.
Pair your IGNITE Modules
Power on your IGNITE module, pair to your smart device and assign a unique color for module identification.
Connect your Fireworks
At your firework clip over the VISCO delay fuse and at the IGNITE module plug in your quick connecter into one of the ports.
Fire your show manually
Using the Free-Shoot mode on your app select the firework you want to fire press fire and off it goes.
Design & Auto-fire your Show
Using IGNITE's online Show Designer create your display and import it to your App then when you're ready press start and the show will fire for you.
The videos & images of products on this site are for guidance only
Due to the 'hand-built' nature of fireworks the duration, effects and visuals can vary from batch to batch and from item to item.
Explosive materials are erratic by nature and perform differently depending on environmental conditions at the time of firing.
See our Terms of Service
IGNITER BREAKOUT BOARD & QUICKPLUG HARNESS (PARALLEL)
Breakout Boards are a convenient, re-usable solution for wiring multiple igniters to a single cue in parallel.
If you are using Talon Clip-On Igniters, you can plug up to two igniters into the breakout board.
If you are using VISCO Shroud Igniters, you can plug up to five igniters into the breakout board, or use multiple breakout boards together for a maximum of 10 igniters per cue.
Includes:
- 1 x Breakout Board
- 1 x Quickplug Harness
An Introduction to IGNITE Firing System
IGNITE is a reusable wireless fireworks firing system designed to fire fireworks from your phone or tablet. Using the IGNITE App, you can control up to six IGNITE i18 modules for a total of 108 cues.
Connect the IGNITE Igniters to the fireworks fuse, plug them into the module, and use the app to manually press buttons or automate your show with one press of a button to optional music.
Download & Install the App
Download the free app and install it on your iOS or Android mobile device.
Pair your IGNITE Modules
Power on your IGNITE module, pair to your smart device and assign a unique color for module identification.
Connect your Fireworks
At your firework clip over the VISCO delay fuse and at the IGNITE module plug in your quick connecter into one of the ports.
Fire your show manually
Using the Free-Shoot mode on your app select the firework you want to fire press fire and off it goes.
Design & Auto-fire your Show
Using IGNITE's online Show Designer create your display and import it to your App then when you're ready press start and the show will fire for you.
The videos & images of products on this site are for guidance only
Due to the 'hand-built' nature of fireworks the duration, effects and visuals can vary from batch to batch and from item to item.
Explosive materials are erratic by nature and perform differently depending on environmental conditions at the time of firing.
See our Terms of Service